36W FLUORESCENT FITTING c/w
EMERGENCY POWER PACK

TECHNICAL SPECIFICATIONS:
Model	EL40P
Mode	A/C & D/C
Light Source	1 x 36W Fluorescent Tube (Tube not inclusive)
Battery Protection	Low Voltage cut-off to prevent battery from over-discharged
Emergency Duration	At least 3 hours after full charged
Charger	Solid state automatic constant current charger
Monitoring	Red LED indicating supply is healthy & charging is on
Ballast	Low Loss Ballast
Casing	Electro galvanized steel with epoxy powder coating
Standby Power Consumption	<10VA
Input Voltage	Single phase, 240V 50Hz
Degree of Protection	IP20 for general interior use
Mounting	Surface mounting direct to wall or ceiling
Wiring Requirement	For installation on normal lighting point wiring (Switched Live) plus an "Unswitched Live" wiring.
Weight EL40P-SLA EL40P-NC	3.50kg 3.30kg
Dimensions EL40P-SLA EL40P-NC	1224mm(L) x 50mm(H) x 78mm(W) 1224mm(L) x 36mm(H) x 50mm(W)
Warranty	Refer to Warranty page
Battery Option	Maintenance-free Rechargeable Sealed Lead Acid (Ordering Code: EL40P-SLA) Sealed Rechargeable Nickel Cadmium Battery (Ordering Code: EL40P-NC)
Summarized Technical Specifications	Elite EL40P-SLA  : 1 x  36W Fluorescent Tube, Maintained A/C Switchable (2 in 1), Self-Contained, Surface Mounted Emergency Light Fitting c/w Rechargeable Sealed Lead Acid Battery with 3 hours Emergency Backup fitted with Low Loss Ballast. (Fluorescent tube not inclusive) Elite EL40P-NC  : 1 x  36W Fluorescent Tube, Maintained A/C Switchable (2 in 1), Self-Contained, Surface Mounted Emergency Light Fitting c/w Sealed Rechargeable Nickel Cadmium Battery with 3 hours Emergency Backup fitted with Low Loss Ballast. (Fluorescent tube not inclusive)
Price	for quotation.

# Specifications are subjected to change without prior notice 
due to continuous improvement of products.

Bomba approved Emergency Lighting and Keluar (Exit) Sign Manufacturer, Malaysia